1：
PrinterTry not to place it near the tuyere, especially fans, air conditioners, etc., which do not blow the nozzles of the printer, because the nozzles of the printer are high-precision nozzles, each nozzle has an inkjet volume of 80PL. If the fan blows against the nozzle, the ink droplets will be blown away and the printing will not produce the desired effect.
2：
PrinterIt must be carefully cleaned before printing. The so-called cleaning is divided into three steps.1: Squeeze 3-5 drops of cleaning solution against the nozzle with a cleaning bottle to ensure that the nozzle hole is wet. 2: Squeeze the ink cartridge below the printer and squeeze 3-5 drops of ink. 3: Click the maintenance test button on the screen of the printer to slowly pull it from the front of the nozzle with a piece of white paper. Several uniform black squares appear, which is to complete the cleaning of the printer. After the printer is cleaned, it can be printed normally.
3: Do not change the position of the connecting block in front of the nozzle. The nozzle should be installed in strict accordance with the factory standard. Otherwise, there may be insufficient ink supply or dripping.
4: Set the anti-blocking parameters. In summer, the anti-blocking parameter level is set higher, and in winter, the anti-blocking parameter level is set lower.
5: When the printer is not used for a long time, try to maintain it once a week to extend the life of the nozzle.
6: After the inkjet printer is used, the English nozzle cover is covered, so that the nozzle can be protected, and the ink can be prevented from drying too fast before the nozzle.
If all of the above can be done, the printer will print a perfect result for you.
Article by: Foshan inkjet printerwww.lienrb.com Yucheng Packaging Equipment Co., Ltd. provides the arrangement, this view does not represent the viewpoint of this site.
